';
side-area-logo

PoE SDN Switch

WBX6248C Enterprise Class PoE SDN Ready Switch

WBX6248C Enterprise Class PoE SDN Ready Switch

48x 1GbE PoE - 4x 10GbE SFP+ SDN Switch
WiBerX networking solutions are based on Open Networking Standards, ensuring interoperability and programmability and allowing Service Providers the flexibility of provisioning systems functionalities in real time without the limitation of legacy networking solutions.
Image module
WBX6248C 48x 1GbE BaseT Switch
SDN and NFV Ready Carrier Grade Switch
WBX6248C PoE has 48 10/100/1000BaseT copper ports plus 2 combo SFP ports and 2 SFP+ ports. Each copper port supports auto-sensing and auto negotiation. To further simplify network setups, all ports also automatically sense half- or full-duplex connections for high-speed server or switch-to-switch configurations.

WBX6248C PoE has 48 10/100/1000BaseT copper ports plus 2 combo SFP ports and 2 SFP+ ports.  Each copper port supports auto-sensing and auto negotiation. To further simplify network setups, all ports also automatically sense half- or full-duplex connections for high-speed server or switch-to-switch configurations. The WBX6248C PoE provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. All of these 48 10/100/1000Base-T ports can supply industry-standard IEEE 802.3at power over Ethernet. Advanced auto-sensing algorithm gives power only to 802.3at complied end devices, preventing of damaging proprietary PoE or non-PoE equipment.

Ports

  • 48x 1GbE RJ-45 port plus 2x combo 1GbE SFP ports
  • 2x 10GbE SFP+ for uplink
  • Support 48port 802.3at PoE
  • 1 RJ-45 10/100/1000Mbps out-of-band management port
  • 1 RJ-45 console Port
  • 1 USB port​

Performance

  • Switching Chip: Broadcom Helix4
  • Switching capacity:68Gps (136Gbps full-duplex)
  • Packet Buffer Memory: 4MB
  • Jumbo Frame: 12K
  • MAC Address: Max 96K​

Processor, Memories & Storage

  • Processor: Embedded ARM 9
  • Memory: 1GB DDR3
  • NAND Flash 4GB​

Supported SFP and SFP+ transceivers

  • 10GBASE-CR DAC
  • 10GBASE-SR
  • 10GBASE-LR
  • 10GBASE-ER
  • 10GBASE-LRM
  • 1000BASE-SX
  • 1000BASE-LX

Power & Fan

  • 1 Fan tray
  • 1 1100W AC power supply and 2nd PSU required for redundancy
  • Input voltage : AC 100 ~ 240V
  • Output voltage: DC 12V
  • Power consumption: System 65W; POE 900W; Max. 1100W
  • Additional 1100W PoE power from external power supply

Environmental specifications

  • Operating temperature 0 to 40
  • Operating relative humity: 10 to 90$ RH
  • Storage temperature: -20 to 70℃
  • Storage humidity: 5 to 95% RH

Mechanical:

  • Dimensions (WxDxH): 438.5x407x43.5 mm
  • Weight: 6.95 kg

Regulatory Compliance

  • Safety: EN 60950-1, UL/CSA 60950-1, IEC 60950-1
  • Emissions: AS/NZS CISPR 22: Class A, ICES-003, Issue Class A, EN 55022: Class A, VCCI Class A, FCC CFR 47 Part 15, Subpart B Class A
  • Immunity: EN 300 386, EN55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN61000-4-8, EN61000-4-11
  • RoHS: All AG-Series components are EU RoHS compliant​

Networking OS

  • ​ICOS preloaded

Optical Transport Solutions

SDN and NFV Open Networking Platforms
Image
WBX7648A 48x 10GbE Switch
SDN Ready Carrier Grade Switch
The WBX7648A is a carrier grade edge switch with deep buffers for carrier grade network deployments. WBX7648A offers 6x 100GE uplink ports and virtualization features.
Image
WBX8032 SDN Switch
32x 40GbE QSFP SDN Ready Switch
The WBX8032 is a high performance carrier grade switch design for optical transport applications. WBX8032 help operators to achieve flexibility, scalability and cost efficiency.
Image
WBX9032 100GbE Switch
32x 100GbE QSFP28 SDN Carrier Grade Switch
The WBX9032 is a high performance carrier grade switch design for optical transport applications. Is a flexible, scalable and efficient Open Networking Platform.